Quick Start Video
Line up your bike - align the rear wheel of your bike over the center wheel space int he BokeyBoard.
Secure your bike to the BokeyBoard with the included cinch straps.
Pedal - practice pedaling and making full revolutions.
For additional information and tips on getting the most out of your BokeyBoard, see the below detailed steps.
Set the Training Wheels
Adjust your training wheels to make them even and set to the maximum height. This will insure there is proper clearance for the rear wheel to spin freely.
If your training wheels look like the picture on top, adjust them to sit even with the floor. You want your training wheels to look like the bottom picture.Tighten the training wheel fasteners as much as possible to prevent any slip while riding.
*If your training wheels are the ones with springs, do NOT use on the BokeyBoard. There is too much movement to be used on the BokeyBoard and the rear wheel will not spin freely.
Aligning the Bicycle
The BokeyBoard is designed to accommodate most 12" to 20" bicycles with training wheels.
Align the rear wheel over the center space in the BokeyBoard. The straps should be set up with the smooth side up and the loops to the rear of the BokeyBoard.
Roll the bicycle into place and check to make sure the rear wheel has the clearance to spin freely.
Secure Bicycle to the BokeyBoard
Secure your bicycle to the BokeyBoard using the supplied hook-and-loop cinch straps.
Pull the ends of the straps to the top of the training wheel. Slide the loose end through the loop end of the strap.
Pull tightly in the opposite direction and attach the "hook" end of the strap to the "loop" material to lock in place.
Perform this on both sides of the BokeyBoard to complete this step.
Ready to Ride
Your BokeyBoard is ready to ride! Take this opportunity to set the proper ride height and handlebar alignment for the rider. There are some tips below to maximize your rider's success.
Instructions
The image on this page will give you an overview of how to safely use your Bokey Board. If you have any questions, please use the contact us link and one of our support team members will respond to assist you.
